6
5. Viewing the log data on a PC Map
You can download log information to a PC and check it.
L Windows 10 is used for these instructions.
1. Turn OFF the transceiver, and then remove the
microSD card.
L To remove the card while the transceiver is ON,
unmount it rst. (See the transceiver’s manual.)
2. Insert a microSD card into the SD card slot of the
PC or the memory card reader connected to the
PC.
3. Click the “Open folder to view files” option to
access the card.
L The folder with the name of your transceiver is
displayed.
4. Double-click the “ID-52” (example) folder.
5. Double-click the “Gps” folder.
• The log les are displayed.
L The les are named with the time the log was
started, in the following format:
yyyymmdd_hhmmss.log (yyyy: Year, mm: month, dd:
day, hh: hour, mm: minute, ss: second).
L You can see your route on the software map by
importing the selected log.
L The le may not be compatible with all mapping
software.
TIP: You can display your route on Google Earth
(free map software).
1. Select “GPS” in the “Tools” menu of Google
Earth.
2. Check “Import from file” in the “GPS Import”
screen, and then click “Import.”
3. Select the log file displayed in step 4 on the left.
• The log is displayed on the map, as shown below.
©Google
The screen that the log le is displayed in Google Earth.
L You can display the logged altitude information by right-
clicking on the displayed log, and then select “Show
Elevation Prole.”
Click
Click
Click
The log les are
saved here.
To Next Page
Loading...
Need help?
General
