3-5
■ Frequency setting
The transceiver has several tuning methods for conve-
nient frequency tuning.
D
Tuning with the main dial
q Push the desired band key on the keypad 1–3
times.
• 3 different frequencies can be selected on each band
with the band key.
• Push [MAIN] or [SUB] to select the band in advance.
w Rotate the main dial to set the desired frequency in
main band, rotate the sub dial to set the desired fre-
quency in sub band.
If the dial lock function is activated, the lock indicator
lights, and the main dial does not function. In this
case, push [LOCK] to deactivate the lock function.
(see p. 5-18 for details)
✔
CONVENIENT!
The sub dial is available for when tuning frequency in
sub band. The sub dial allows quick tuning in sub band
without main/sub band selection.
D
Direct frequency entry with the keypad
The transceiver has a keypad for direct frequency
entry as described below.
q Push [MAIN] or [SUB] to select the band.
w Push [F-INP•
ENT].
• “ ” indicator appears and keypad backlight
lights.
e Input the desired frequency
• Push [GENE•.] to input “. (decimal point)” between the
MHz units and kHz units.
r Push [F-INP•
ENT
] to set the input frequency.
• To cancel the input, push [Y]/[Z] instead of [GENE•.].
To Next Page
Loading...
Need help?
General
