2
1
PANEL DESCRIPTION
1
BASIC MANUAL
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
■ Keypad
z Push to set the frequency, select a Memory channel, and so on.
z Push [FUNC], and then push or hold down another key within 3 seconds to use the
secondary functions listed below.
KEYS FUNCTIONS
Push [1]/[ANL] Turn the Automatic Noise Limiter (ANL) function ON or OFF.
Push [2]/[SCAN] Start a scan.
L Push [CLR] to stop a scan.
Push [3]/[GRP] In the Memory mode, enter the Memory Selection mode.
Push [4]/[WX-ALT]* Turn the Weather Alert function ON or OFF.
Push [5]/[DUP-W]* Enter the Duplex Frequency Entry mode.
L Conrm the NAV band frequency is selected.
Push [6]/[DUP]* Turn the Duplex function ON or OFF.
L Conrm the NAV band frequency is selected.
Push [7]/[WX]* Enter the Weather Channel Selection mode.
Push [8]/[BEEP] Turn the Key beep ON or OFF.
Push [9]/[TAG] Tag or untag the selected Memory channel or Weather Channel*.
Hold down
[ENT]/[SET] for 1
second
Enter the Set mode.
Push [0]/[121.5] Select the emergency frequency.
*For only the USA version.
To Next Page
Loading...
Need help?
General
