Icom IC-A3 User Manual

[Sea
MEMORY
OPERATION
4
Hl
i
Memory
channel
selection
i
Transferring
memory
fs
The
transceiver
has
50
memory
channels
for
storage
of
contents
a
often-used
frequencies
along
with
6-character
notes.
Fa]
This function transfers a memory channel's contents into
the frequency mode. This is useful when searching for
@ Push [MR] to select memory mode,
signals around a memory channel's frequency.
@ Select the desired memory channel.
Using
the
tuning
dial:
=
Rotate
the
tuning
dial
to
select
the
desired
memory
then
channel.
* Only programmed memory channels appear.
Using the keypad:
Push 2 appropriate digit keys (01-50) to select the
desired
memory
channel.
Memory
mode
Frequency
mode
*
To
select
memory
channels
1-9,
push
[1}-[9]
then
[ENT];
or,
push
[0]
then
[1}-{9].
@
Push
[MR]
to
select
memory
mode.
Using
the
A/¥
keys:
©
"M’
appears,
Push
[A]
or
[¥]
to
change
the
memory
channel.
@®
Select
the
desired
memory
channel
to
be
transferred
*
Pushing
[A]
or
[W]
changes
the
memory
channel
contin-
using
the
tuning
dial
or
keypad.
uously.
:
@
Push
[F]
then
[(MR-MW}.
@
When
a
comment
appears,
push
[MA]
to
display
the
*"M"
disappears
as
frequency
mode
is
automatically
selected
Programmed
frequency,
if
desired.
and
the
memory
contents
are
transferred,
@ To return to frequency mode, push [CLR].
Comments appear first when programmed, however, the
transceiver can be programmed to show the operating
frequency first by your dealer. Push [MR] to display the
comment in this case.
12
KDC?RDRB?3O[™

Icom IC-A3 Specifications

General

Brand	Icom
Model	IC-A3
Category	Transceiver
Language	English