Icom IC-A3 User Manual

men 5
15
SCAN OPERATION
i Scan types
The U.S.A. version has 3 scan types to suit your needs. The
non-U.S.A. versions have 2 scan types.
FULL SCAN (p. 15) Repeatedly scans all fre-
quencies over the entire
118.00 136.975
MHz MHz band.
MEMORY SCAN (p. 15) Repeatedly scans
tations memory channels except
channel lockout channels. Used
for checking often-used
channels and bypassing
usually busy channels
D>
Leena such as control-tower
channel frequencies.
WEATHER CHANNEL SCAN (p. 16)
Repeatedly scans all weather channels except lockout
channels. Weather channels are available for the U.S.A.
version only.
Full scan
@ Push [CLR] to select frequency mode.
® Set [SQL] to the point where noise is just muted.
@ Push [F] then [A-UP SCAN] or [W-DN SCAN] to start
the scan.
* When a signal is received, the scan pauses until it disap-
pears. To resume the scan, rotate the tuning dial or push the
[A]or[¥] key.
* To change the scanning direction, rotate the tuning dial or
push the [A] or [W] key.
@ To stop the scan, push [CLR].
Mi Memory scan
@ Push [MR] to select memory mode.
@® Set [SQL] to the point where noise is just muted.
@ Push [F] then [A-UP SCAN] or ['W-DN SCAN} to start
the scan,
* When a signal is received, the scan pauses until it disap-
pears. To resume the scan, rotate the tuning dial or push the
[A] or[¥] key.
*To change the scanning direction, rotate the tuning dial or
push the [A] or [W] key,
@ To stop the scan, push [CLR].

Icom IC-A3 Specifications

General

Brand	Icom
Model	IC-A3
Category	Transceiver
Language	English