Icom IC-A3 User Manual

i Weather channel scan
(U.S.A. version only)
@ Push [F] then [ENT-Wx] to select a weather channel.
® Set [SQL] to the point where noise is just muted.
@ Push [F] then [A*UP SCAN] or [W-DN SCAN] to start
the scan,
«When a signal is received, the scan pauses until it disap-
pears. To resume the scan, rotate the tuning dial or push the
[A] or[W] key.
* To change the scanning direction, rotate the tuning dial or
push the [A] or['¥] key,
@ To stop the scan, push [CLR].
z
|OTE: A paused frequency or channel is not backed up
automatically. Push [CLR] to stop the scan then wait 2
sec. before turning power OFF, otherwise, the previous
frequency or channel appears when turning power ON
again.
KS.
SCAN OPERATION 5
i Lockout channels
Memory and weather* channels can be specified to be
skipped for the memory and weather* channel scans,
respectively. The lockout channel function is only available
during scan operation.
‘Shows the lockout
channel.
M
124616
Memory channel 20 is
skipped during memory
scan, scan.
Memory channel 20 is
scanned during memory
@ Push [MR] to select memory mode; or, push [F] then
[ENT-WX] to select a weather channel,*
@® Select the desired channel to be locked out.
@ Push [F] then [@LOCK OUT].
* "LOCK OUT appears,
Lockout channels are skipped during scan.
@ To cancel the lockout setting, repeat above steps.
* Weather channel: U.S.A. version only.
ENGLISH

Icom IC-A3 Specifications

General

Brand	Icom
Model	IC-A3
Category	Transceiver
Language	English