Icom IC-F11 User Manual

1 2
1
PANEL DESCRIPTION
PANEL DESCRIPTION
1
q CHANNEL SELECTOR/SW [CH]
• 2CH version: Toggle the CH switch to select CH1 or CH2.
• 16CH version: Turn the selector knob to select the pro-
grammed operating channel.
w VOLUME CONTROL [OFF/VOL]
Turns power ON and adjusts the audio level.
e DEALER-PROGRAMMABLE KEY [Upper]
Can be programmed for one of several functions by your Icom
dealer.
r PTT SWITCH [PTT]
Push and hold to transmit; release to receive.
t DEALER-PROGRAMMABLE KEY [Lower]
Can be programmed for one of several functions by your Icom
dealer.
y ANTENNA CONNECTOR
Connects the supplied antenna.
u TX/RX INDICATOR LED (see p. 3)
• Lights red while transmitting.
• Lights green while receiving a signal, or squelch is open.
i [SP]/[MIC] JACK
Connects optional speaker-microphone.
NOTE: Above functions depend on pre-setting.
‘‘
Switches, controls, keys and
connectors
y
u
Speaker
Mic
w
e
r
t
i
2CH version
CH1↔CH2
16CH version
CH1 to CH16
q
SP
MIC
Red
Upper
Lower
Mic Up*
Mic Down*
Mic A*
Mic B*
DD
Programmable key reference ([Red] depends on version.)
*These functions are available when the optional Speaker/Mic. is con-
nected.

Icom IC-F11 Specifications

General

Brand	Icom
Model	IC-F11
Category	Transceiver
Language	English