Icom IC-F2000 series User Manual

14
2
16
15
14
13
12
11
10
9
8
7
6
5
4
3
1
2
BASIC OPERATION
■ User set mode
The User Set mode enables you to change various settings.
You can “customize” the transceiver operation to suit your
preferences and operating style.
The display illustration is for the Simple type and 10-key type
transceivers.
< for the Non-display type transceivers >
For settings of the microphone gain, the squelch level, the
Beep level, the Beep function, and the Ringer level, see
page 16 to 19.
< for the Simple type and 10-key type transceivers >
When [User Set Mode] is assigned to your transceiver, see
page 9 for entering the User Set mode.
Backlight
ON: Always lit•
AUT: Lit for 5 seconds when pushing •
any key except [PTT].
AU2: Lit for 5 seconds every time the •
display changes the contents.
OFF: Does not light•
Beep ON/OFF
ON: Beeps sound•
OFF: No beeps sound•
Beep Level
1 (minimum) – 5 (maximum)•
1• ❋ (minimum) – 5❋ (maximum)
Linked with the audio level.
The beep audio level is adjustable by
rotating [VOL].
Ringer Level
1 (minimum) – 5 (maximum)•
1• ❋ (minimum) – 5❋ (maximum)
Linked with the audio level.
The ringer audio level is adjustable by
rotating [VOL].

Icom IC-F2000 series Specifications

General

Brand	Icom
Model	IC-F2000 series
Category	Transceiver
Language	English