10
2
PANEL DESCRIPTION
STATUS UP/DOWN KEYS (BIIS operation only)
➥ While in the standby condition, push to display the trans-
mit status indication and select a status number.
➥ When a received SDM is displayed, push to cancel the
automatic scroll and scroll the message manually.
➥ When an SDM that contains more than 8 characters is
displayed, push to scroll the message manually.
MDC CALL KEY
(MDC operation only)
➥ Push to enter the MDC menu selection mode. Then
select the desired MDC menu from “SELCALL,” “MSG,”
“STATUS,” “RADIOCHK” and “CALALERT” using [CH
Up]/[CH Down]/[MDC Up]/[MDC Down].
After selection, push this key again to enter the transceiv-
er alias or message channel selection mode.
➥ While in the transceiver alias or message channel selec-
tion mode, push to return to the MDC menu selection
mode.
MDC UP AND DOWN KEYS
(MDC operation only)
➥ Push to select the MDC menu after pushing [MDC CALL].
➥ Push to select the desired transceiver alias or message
channel while in the transceiver alias or message channel
selection mode.
MDC SELCALL KEY
(MDC operation only)
Push to enter the transceiver alias selection mode.
• After the desired alias selection, push [PTT] to transmit a selective
call.
MDC CALLALERT KEY (MDC operation only)
Push to enter the transceiver alias selection mode.
• After the desired alias selection, push [PTT] to transmit a call alert.
MDC EMG KEY (MDC operation only)
Push and hold for a speified period to transmit an MDC
emergency call.
• If you want to cancel the emergency call, push (or push and hold)
the key again before transmitting the call.
To Next Page
Loading...
Need help?
General
