23
4
BIIS OPERATION
■ Receiving a message
DD
Receiving a status message
q When a status message is received;
• Beeps sound.
• The calling station ID (or text) and the status message is dis-
played alternately when the indication mode is 1 line, depending
on the setting.
w Push [P4] (Moni(Audi)) to return to the standby condition.
NOTE: Only the calling station ID (or text) is displayed
(no message is displayed alternately) when the scroll
timer is set to ‘OFF.’ In this case, push [Status Up]/
[Status Down] to display the status message manually.
DD
Receiving an SDM (Short Data Message)
q When an SDM is received;
• Beeps sound.
• The calling station ID (or text) and the SDM is displayed alter-
nately when the indication mode is 1 line, depending on the set-
ting.
w When the received SDM includes more than 12 charac-
ters, the message scrolls automatically, when the auto-
matic scroll function is activated.
• Push [Status Up]/[Status Down] to scroll the message manually.
e Push [P4] (Moni(Audi)) to return to the standby condition.
To Next Page
Loading...
Need help?
General
