i
FORWARD
Thank you for purchasing this Icom repeater. The IC-
FR5000/IC-FR6000 v h f /u h f dp m r r e p e at e r s is de-
signed and built with Icom’s state of the art technol-
ogy and craftsmanship. With proper care, this product
should provide you with years of trouble-free opera-
tion.
We appreciate you making the IC-FR5000/IC-FR6000
your repeater of choice, and hope you agree with Icom’s
philosophy of “technology first.”
Many hours of research
and development went into the design of your IC-
FR5000/IC-FR6000.
D FEATURES
m Up to two operating channels
You can install a channel extension module (op-
tional UR-FR5000/UR-FR6000) into the repeater
for two channel operation.
m Built-in dPMR system operation
The IC-FR5000/IC-FR6000 provide digital Private
Mobile Radio (dPMR) operation that meets the
6.25 kHz bandwidth requirements for narrow band
operation. This increases the efficiency of channel
allocation and use of the spectrum.
m Built-in 5-Tone, DTMF encoder & decoder
Multiple signaling systems are standard equipment.
These systems are fully compatible with Icom’s F-
series radios.
m DTMF remote control capability
You can control the repeater from a remote location
over the air or over a phone line, with DTMF.
m D-Sub 25 pin ACC port equipped
You can use optional equipment through the D-sub
25 pin ACC port installed on the repeater’s rear
panel.
m Other features
- Wide frequency coverage
(136 to 174 MHz, 400 to 470 MHz)
- PC programmable
- 19 inch rack mount
- Optional Voice Scrambler Unit (UT-109R/
UT-110R) for using the repeater as the base sta-
tion transceiver
IMPORTANT
READ THIS INSTRUCTION MANUAL
CAREFULLY before attempting to operate the re-
peater.
SAVE THIS INSTRUCTION MANUAL– This
manual contains important safety and operating in-
structions for the IC-FR5000/IC-FR6000 v h f /u h f dp m r
r e p e at e r s .
EXPLICIT DEFINITIONS
WORD DEFINITION
R WARNING!
Personal injury, fire hazard or electric
shock may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
VOICE CODING TECHNOLOGY
The AMBE+2™ voice coding Technology embodied in this
product is protected by intellectual property rights including
patent rights, copyrights and trade secrets of Digital Voice
Systems, Inc. This voice coding Technology is licensed
solely for use within this Communications Equipment. The
user of this Technology is explicitly prohibited from attempt-
ing to extract, remove, decompile, reverse engineer, or
disassemble the Object Code, or in any other way convert
the Object Code into a human-readable form. U.S. Pat-
ent
Nos. #5,870,405, #5,826,222, #5,754,974, #5,701,390,
#5,715,365, #5,649,050, #5,630,011, #5,581,656, #5,517,511,
#5,491,772, #5,247,579, #5,226,084 and #5,195,166.
Icom, Icom Inc. and the Icom logo are registered trademarks
of Icom Incorporated (Japan) in Japan, the United States,
the United Kingdom, Germany, France, Spain, Russia and/
or other countries.
All other products or brands are registered trademarks or
trademarks of their respective holders.
To Next Page
Loading...
Need help?
General
