D U.S.A., International and Canadian channels
The transceiver is pre-programmed with 59 U.S.A., 59 Inter-
national and 63 Canadian channels. These channel groups
may be specified for the operating area.
q Push [CH/WX U/I/C] to select a regular channel.
• If a weather channel appears, push [CH/WX U/I/C] again.
w Push and hold [CH/WX U/I/C] for 1 sec. to change the
channel group. Repeat to advance to the next group.
• U.S.A., International and Canadian channel groups can be se-
lected in sequence.
e Push [Y]/[Z] to select a channel.
• “DUP” appears for duplex channels.
D Weather channels
The transceiver has 10 pre-programmed weather channels.
These are used for monitoring broadcasts from the NOAA
(National Oceanic and Atmospheric Administration).
The transceiver can automatically detect a weather alert
tone on the selected weather channel while receiving an-
other channel or during scan. (p. 18)
q Push [CH/WX U/I/C] once or twice to select a weather
channel.
• “WX” appears when a weather channel is selected.
• “WX ALT” appears when the weather alert function is turned
ON. (p. 18)
w Push [Y]/[Z] to select a weather channel.
9
4
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
To Next Page
Loading...
Need help?
General
Weight and Dimensions
