18
7
FUNCTION MODE OPERATION
New2001
You can record the received signal whenever you want by us-
ing the manual recording function.
This function can record the received signal for maximum 30
seconds.
The transmitted signal cannot be recorded.
The previously recorded signal will be overwritten when you re-
cord the next audio using this function.
q Push [F] to enter the function mode,
and then push [Y]/[Z] to select the
manual recording function.
• “M-REC” appears.
w Push [H/L•LOCK] to start record-
ing.
• “REC” appears.
• When the signal disappears, the
transceiver continues recording
without audio.
Push e [F] to stop the recording.
• The recording will automatically stop
after 30 seconds.
Manual recording
mode appears.
“REC” appears
while recording.
• Example— Manual recording
[Less than 30 seconds]
[More than 30 seconds]
Example: 20 seconds
30 seconds
When receiving a signal for 30
seconds or less, this function
records all contents.
30 seconds after you start the manual recording, the
recording will automatically stop.
These contents
will not be recorded.
Start manual
recording.
Start manual
recording.
Stop manual
recording.
Automatically stops
recording.
■ Manual recording function (Depending on versions)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
