18
5
MEMORY CHANNELS
➀ Select the desired bank using [M-CH •BANK
▲
] or
[ENT•BANK
▼
].
➁ Rotate the [M-CH] selector to select the desired
channel.
•Bank limit function
While rotating the [M-CH] selector, memory channels
can be selected from within the current bank only; or
from any bank.
Push [BANK] to toggle the bank limit function ON and
OFF.
✔
Convenient:
Automatic bank limit
When starting memory scan, the bank limit function
is activated automatically. This automatic selection
can be deactivated. See p. 26.
Memory channels in the current bank can only be
selected via the keypad.
➀ Select the desired bank using [M-CH•BANK
▲
] or
[ENT
•BANK
▼
].
➁ Push keys corresponding to the desired channel.
➂ Push the [M-CH] key to set the selected memory
channel.
•Input for memory channels not available is cancelled.
■ Channel selection
D Using the [M-CH] selector
D Using the keypad
To Next Page
Loading...
Need help?
General
