Icom IC-SAT100M User Manual

1
PANEL DESCRIPTIONS
EMERGENCY KEY [EMER]
Hold down to transmit an Emergency call.
SIDE 1 KEY [S1]
Push to display the Message List.
PTT SWITCH [PTT]
Hold down to transmit, release to receive.
P1/P2 KEYS [P1]/[P2]
Push to use the function assigned in the “Key
Setup” menu.
[OK] > Functions > Key Setup
SIDE 2 KEY [S2]
Hold down to turn the RX Speaker function ON or
OFF.
SIDE 3 KEY [S3]
Push to display the Public Address.
MENU/OK KEY [OK]
Push to enter the Menu screen.
Push to select an item in the Menu screen.
BACK/HOME KEY [BACK]
Push to return to the previous Menu screen.
Hold down to exit the Menu screen.
DIRECTIONAL KEY [UP]/[DOWN]/[LEFT]/[RIGHT]
Push to select a menu item, setting, and so on.
STATUS INDICATOR
Lights green while receiving.
Blinks green while in the “OPEN” status.
Lights red while transmitting.
Blinks orange while registering, or no satellites
are found.
VOLUME/POWER CONTROL [VOL]
Hold down to turn the transceiver ON or OFF.
Rotate to adjust the audio output level.
TALKGROUP SELECTOR
Rotate to select a talkgroup.
Microphone
Speaker
Microphone Description

Icom IC-SAT100M Specifications

General

Brand	Icom
Model	IC-SAT100M
Category	Radio
Language	English