10
ESPRIT 2 - User’s
5 QUICK REVIEW OF PROGRAMMED TIMES AND TEMPERATURES
DISPLAY SHOWS time / day
and backlight is OFF
DISPLAY SHOWS time / day
and backlight is ON
The left hand “Timed” is flashing, together
with the Radiator symbol and the word
“PROG” is showing
The left (or right) hand “Timed” is flashing,
together with the Radiator (or Tap) Symbol
is the PROG button
is the SELECT button
are the UP and DOWN buttons
Radiator (or Tap) symbol is steady.
The first ON time for Monday is shown
Monday’s first OFF time is shown
etc.......
The last OFF time for Sunday is shown
Return to “Monday”
S
P
P
P
S
Press ‘PROG’ button briefly
Press ‘PROG’ button and hold until . . .
“
o
C” is flashing, together with the Tap
symbol
The Tap symbol is steady.
Temperature is displayed
Return to time / date display
S
S
*For systems with underfloor heating or other systems
requiring a maximum flow temperature different to 82
o
C, the
maximum radiator temperature can be set in a similar
manner to “Setting the HW Temperature”.
Note.
This section cannot be used to amend the settings,
see Frames 3 and 4.
Checking the Heating (or Hot Water) times Checking the Hot Water Temperature *
206104-1.pmd 26/05/2010, 16:0110
To Next Page
Loading...
Need help?
General