8
ESPRIT 2 - User’s
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○
3 PROGRAMMING THE HEATING (OR HOT WATER) PERIODS
ITIME PROGRAMMER
DISPLAY SHOWS time / day
and backlight is OFF
DISPLAY SHOWS time / day
and backlight is ON
The left hand “Timed” is flashing, together
with the Radiator symbol and the word
“PROG” is showing
The right hand “Timed” is flashing,
together with the Tap symbol
and the word “PROG” is showing
is the PROG button
is the SELECT button
are the UP and DOWN buttons
Radiator (or Tap) symbol is steady.
The seven days of the week are flashing
“1” flashes, indicating that you have
selected period 1 on the day(s) shown
“ON” flashes, and a time is showing
The “hours” figure flashes
The “minutes” figure flashes
(12 hr mode only)
The “am” or “pm” symbol flashes
Use Up and Down Buttons to set
chosen day. (You can also select groups
Mon-Fri, Sat-Sun, Mon-Sun)
S
S
P
P
P
S
Select period 2 or 3 if required.
S
Select “ON” or “OFF” as required.
You can also select “DELETE” to
exclude this time period altogether.
S
Set Hour
S
Set minute
S
Press ‘PROG’ button briefly
Press ‘PROG’ button briefly
For Hot Water
For Heating
Press down arrow twice or
up arrow twice until . .
Now repeat for the “OFF” time
Next, do the same for period 2 (and 3)
Then repeat for other days as required
P P
○○○○○○○
P
○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○
Display returns to flashing “ON” etc.
Set as appropriate
S
206104-1.pmd 26/05/2010, 16:018
To Next Page
Loading...
Need help?
General