9
ESPRIT 2 - User’s
4 SETTING THE HOT WATER TEMPERATURE*
DISPLAY SHOWS time / day
and backlight is OFF
DISPLAY SHOWS time / day
and backlight is ON
The left hand “Timed” is flashing, together
with the Radiator symbol and the word
“PROG” is showing
The Tap symbol is flashing
together with “
o
C”
is the PROG button
is the SELECT button
are the UP and DOWN buttons
The Tap symbol is steady.
The temperature figure flashes
Use Up and Down buttons to set value.
Hot water delivery temperature
can be set from 40 to 65
o
C
Change accepted.
Display reverts to normal
S
P
P
P
S
Press ‘PROG’ button briefly
Press ‘PROG’ button briefly
Press down arrow twice or
up arrow three times until. .
S
*For systems with underfloor heating or other systems requiring a maximum
flow temperature different to 82
o
C, the maximum radiator temperature can be
set in a similar manner to “Setting the HW Temperature”.
206104-1.pmd 26/05/2010, 16:019
To Next Page
Loading...
Need help?
General