vents dangerous arcing during a
shorted condition. The resistors are
rated to 140Ω +/- 10%. Fusing cur-
rent is 1A at 125V. Fusing time is
30-60ms at 125V, without causing
dangerous conditions during opening
of the fuse element. Leads need to
be replaced when fuse has opened.
Note that TL-80 and TL-82 test leads
can only be specifically used with the
61-085 and 61-086 testers.
Maintenance:
• Clean the case with a damp cloth and
mild detergent. Do not use abrasives or
solvents.
Service, and Replacement Parts:
For replacement parts or to inquire about
service information contact
IDEAL INDUSTRIES, INC.
Attn: Repair Dept.
1000 Park Avenue
Sycamore, IL 60178
Technical Support: 1-877-901-2005
or visit our website
www.testersandmeters.com.
Specifications:
VAC Ranges: 120V, 240V, 480V, 600V AC.
VAC Accuracy: Relative indication only
VDC Ranges: 120V, 240V, 600V DC
VDC Accuracy: Relative indication only
Continuity (61-086 only): Continuous LED
and audible indication at less than 500kΩ
resistance.
Response time of 100ms.
Operating Frequency: 25-60 Hz
Input Impedance: Low
Operating Environment: 32° F to 122° F
(<70% humidity)
Storage Temp.: -4° F to 140° F
(<80% humidity)
Altitude: 2000m
Indoor Use
Battery: (4) 1.5V (IDEAL# 61-201, IEC
#LR44, or NEOA# 1166A).
Battery Life: 200 hours typical.
Accessories included: Test Leads, (4)
1.5V "LR44" batteries, operating instructions
Dimensions: 6.0" (H), 2.3" (W), 1.2" (D)
Weight: 8.0 oz
Safety: EN61010, CAT III 600V, CE, UL,
(3111) cUL
■ Double Insulation
Warranty Statement:
This tester is warranted to the original pur-
chaser against defects in material and work-
manship for five years after purchase.
During this warranty period, IDEAL INDUS-
TRIES, INC. will, at it’s option, replace or
repair the defective unit, subject to verifica-
tion of the defect or malfunction.
To Previous Page
Loading...
Need help?
Electrical Specifications
Weight and Dimensions
