iDevices iGrill 2 User Manual

5
Battery Replacement
To replace your iGrill
2
batteries, follow these steps:
• Separate the iGrill
2
from its base by rmly holding the base with one
hand and gently pull the iGrill
2
top upwards with the other hand.
• On the underside of the iGrill
2
, depress and remove the battery
door.
• Replace the two AA batteries with their negative terminals
compressing the springs and replace the battery door.
Battery Precautions:
• Do not mix new and old batteries
• Do not mix alkaline, standard (carbon zinc) or rechargeable (ni-cad,
ni-mh, etc.) batteries.
• Dispose of spent or damaged batteries according to manufacturer
instructions and local laws.
Powering On & Off
To turn on the iGrill
2
, follow these steps:
• Press the power button located at the bottom of the faceplate
between the < and > buttons.
• The display will animate, and a single beep will be heard, indicating
it has powered on.
To turn off the iGrill
2
, follow these steps:
• Press and hold down the power button located at the bottom of
the faceplate between the < and > buttons for three seconds. The
display will show “OFF”.
• Upon releasing the power button, the iGrill
2
will turn off.
Auto Shut-Off:
• The iGrill
2
will stay powered on for ve minutes before automatically
turning off if there are no probes installed and it is not paired to a
smart device.

iDevices iGrill 2 Specifications

General

Brand	iDevices
Model	iGrill 2
Category	Thermometer
Language	English