3.3 Fahrenheit or Celsius Selector
Switch between Fahrenheit and Celsius readings using the switch on the
back of the iGrill.
NOTE: Switching between Fahrenheit and Celsius readings can also be
done in the iGrill Pro App.
3.4 Clearing Bluetooth Connections
Since every iGrill has been extensively tested in our factory prior to
distribution it is imperative to delete any memorized connections stored in
the iGrill. To do so, follow these steps precisely:
• Press and hold the plus (+) and minus (–) buttons.
• Then press the power button.
• Hold all three buttons down until you hear a long steady beep.
• Release the buttons.
The long beep will indicate that your iGrill has powered up and has been
cleared of any previous pairings. These steps are only necessary the first
time you pair an Apple device with your iGrill, when you change batteries,
or when connecting to a different Apple device.
NOTE: The iGrill can only pair with one Apple device at a time!
3.5 Powering On
• Turn the iGrill on by pressing and holding the power button for 4
seconds.
• You will hear a beep and see the blue Bluetooth light flashing.
• This indicates your iGrill is not yet connected to your Apple device.
To Next Page
Loading...
Need help?
General
