iDevices SOCKET User Manual

6
Night Light Color Codes
The iDevices
®
Socket uses the nightlight LEDs to indicate the status or
mode of the Socket during and after initial set up. Typically the LEDs are
only used when there is no other means to inform the user of the status
of the Socket. The following table summarizes the Socket modes and LED
status states.
MODE DESCRIPTION
Pairing Mode The Socket is waiting for the iOS device to congure the accessory’s
Wi-Fi. The LEDs ash blue.
Pairing Restart To reinitiate pairing mode, hold the button down for 3 seconds and
the LED will rapidly ash blue
Wi-Fi Link Up When the Socket joins a Wi-Fi network, the LEDs fast ash green for
a second.
Wi-Fi Link Down When the Socket has lost the connection to the Wi-Fi network (i.e. link
is down) the LEDs slow ash orange until the link is up
Factory Reset To initiate a factory reset, which will clear all Wi-Fi and pairing
information, hold the button down for 10 seconds until the LEDs
rapidly ash red. When the button is released the unit will reboot and
reenter the pairing mode.
Identify When the accessory receives a request to identify itself it fast ashes
purple for six seconds.
Rating Information
UL Rated to UL STD 496
Listing: E483271
Input: 125VAC, 60 Hz
Max: 60W
For use in dry, indoor locations only.
This product is not to be used by children or persons with reduced
physical, sensory or cognitive capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction.
Children should be supervised and instructed not to play with this product.

iDevices SOCKET Specifications

General

Brand	iDevices
Model	SOCKET
Category	Transformer
Language	English