AmpliTube X-DRIVE
14
METAL
Based on BOSS® MT-2
Inspired by one of the most favorite metal pedals of all time, perfect for extreme gain and sustain. Nothing
compares to this pedal for pure distortion mayhem. It features punch, color and presence to sculpt the perfect
high gain tone under your feet.
Parameters
• DRIVE: increases the amount of clipping in the distortion circuit.
From 0 to 10.
• BASS: boosts and cuts the low frequencies.
From -6 dB to +6 dB.
• MID: boosts and cuts the mid frequencies.
From -6 dB to +6 dB.
• TREBLE: boosts and cuts the high frequencies.
From -6 dB to +6 dB.
• VOLUME: sets the output level.
From 0 to 10.
• PUNCH: boosts the low frequencies.
From -15 dB to 15 dB.
• COLOR: enhance the mid-frequency response.
From -15 dB to +15 dB.
• COLOR FREQ: selects the mid-frequency for the COLOR parameter.
From 300 Hz to 6000 Hz.
• PRESENCE: boosts the high frequencies.
From -15 dB to +15 dB.
• MID Q: sets the bandwidth of the mid parameter EQ from narrow to wide.
From 0.2 to 3.
• MID FREQ: changes the center frequency of the mid parametric EQ.
From 80 Hz to 5000 Hz.
• EQ POSITION: sets the tone EQ pre or post clipping.
PRE or POST.
• NOISE GATE: turns the noise gate ON or OFF.
ON or OFF.
• NG THRESHOLD: adjusts the sensitivity of the gate’s threshold.
From -100 dB to 0 dB.
• NG RELEASE: adjusts the time of the gate’s release.
From 20 ms to 1500 ms.
• NG DEPTH: adjusts the gate’s deepness.
From -20 dB to -100 dB.
• COMPRESSOR: turns the compressor ON or OFF.
ON or OFF.
To Next Page
Loading...
Need help?
General
