AmpliTube X-SPACE
Global Setup
38
MIDI CHANNEL
Selects on which MIDI channel the X-GEAR pedal operates, from 1 to 16. By default X-GEAR pedals operate to
channel 1.
MIDI THRU
Selects which MIDI signals are sent to the MIDI outputs (MIDI and USB ports).
• OFF: no MIDI signals are sent to the MIDI outputs.
• THRU: the MIDI signals arriving to the X-GEAR MIDI input are sent to the X-GEAR MIDI outputs.
• MERGE: the MIDI signals arriving to the X-GEAR MIDI input and the MIDI signals generated by the pedal
are merged and sent to the X-GEAR MIDI outputs.
MAIN VOL
Controls the master volume of the pedal from -40 dB to +3 dB.
INTERFACE VOL
Controls the master volume when the pedal is set in interface mode from -40 dB to +3 dB.
By default, the volume is set to -20 dB.
MIDI CLOCK
Sets the MIDI CLOCK function.
• OFF: no MIDI CLOCK function is active.
• DIN: the MIDI CLOCK is set by the incoming MIDI clock from the MIDI input.
• USB: the MIDI CLOCK is set by the incoming MIDI clock from the USB input.
N.B. When the MIDI CLOCK is coming from outside the TAP Tempo footswitch is disabled and is synced with
the incoming tempo, its led becomes amber to get visual feedback of this status.
CAB SIM
Activates and selects the cabinet simulator.
• OFF: disables Cab Sim.
• CAB 1: activates the Cab Sim with the first cabinet IR.
• CAB 2: activates the Cab Sim with the second cabinet IR.
• CAB 3: activates the Cab Sim with the third cabinet IR.
• CAB 4: activates the Cab Sim with the fourth cabinet IR.
• BASS: activates the Cab Sim with the fifth cabinet IR.
N.B. If you also want the Cab Sim when the pedal is bypassed, the BUFFER BYPASS MODE is required.
To Next Page
Loading...
Need help?
General
