AmpliTube X-TIME
Tempo, BPM Mode and tap tempo footswitch
37
Tempo, BPM Mode and tap tempo footswitch
The TAP footswitch is used to tap in a tempo with your foot and its led blinks accordingly.
BPM SYNC OFF
If the preset’s BPM SYNC is OFF the preset tempo is expressed in milliseconds and is linked to the tap tempo
footswitch.
When BPM SYNC is OFF the tap LED blinks blue.
BPM SYNC ON
If BPM SYNC is ON, the preset tempo is expressed in BPM and is linked to the tap tempo footswitch. The
tempo can be set by tapping quarter notes with the tap tempo footswitch and the TIME knob lets you set the
desired time signature for the repetitions.
The available time signatures are (D stands for Dotted and T stands for Triplets):
• 1/32
• 1/32D
• 1/32T
• 1/16
• 1/16D
• 1/16T
• 1/8
• 1/8D
• 1/8T
• 1/4
• 1/4D
• 1/4T
• 1/2
• 1/2D
• 1/2T
• 1/1
• 1/1D
• 1/1T
When BPM SYNC is ON the tap tempo LED blinks green.
BPM MODE
BPM MODE is an option when BPM SYNC is ON.
When BPM MODE is set to PRESET the tempo follows the preset’s BPM and is custom to each preset.
When BPM MODE is set to GLOBAL the tempo follows the global BPM and all presets with BPM MODE set to
GLOBAL follow this BPM.
To Next Page
Loading...
Need help?
General
