1. Turn the glass cover anti - clockwise and
remove it. Clean the glass cover.
2. If necessary, replace the old oven lamp
with a 15/25 watt, 230V (50Hz), 300 °C
heat resistant oven lamp (Connection type:
E14).
3. Refit the glass cover.
What to do if…
Problem Possible cause Solution
The oven does not op-
erate
The required setting have not
been set
check if cooking function and tem-
perature are selected
The oven does not op-
erate
The appliance is not correctly
connected or/and the mains
supply to the oven is not on
Check if the appliance is correctly
connected and the mains supply
to the oven is on
The temperature indica-
tor does not come on
The required setting have not
been set
Select the cooking function and
temperature
The oven lamp is not
working
The oven lamp bulb is faulty Replace the oven lamp bulb
Steam and condensa-
tion settle on the food
and in the oven cavity
Dishes have been left in the oven
for too long
Do not leave the dishes standing
in the oven for longer than 15-20
minutes after the cooking process
ends
“12.00” appears on the
display and the clock
LED is flashing
Interruption of the power sup-
ply.
Reset the time
F11 appears on the dis-
play
The plug of the meat probe is not
firmly in position in the socket
Insert the meat probe plug into the
socket in the side wall of the oven
as far as it can go
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a sol-
ution to the problem yourself, contact your
dealer or the After Sales Service.
If you operated the appliance wrongly, or
the installation was not carried out by a
registered engineer, the visit from the After
Sales Service technician or dealer may not
take place free of charge, even during the
warranty period.
Technical data
Dimensions (internal) Width
Height
Depth
594
888
548
ENGLISH 13
To Next Page
Loading...
Need help?
General