Heat setting
display
Description
Cookware is unsuitable,
too small, or no cook-
ware is on the cooking
zone
The Automatic Switch
off is on
The Stop+Go is on
Residual heat indicator
Warning! Risk of burns from residual
heat! After you switch the appliance
off, the cooking zones need some time to
cool down. Look at the residual heat
indicator
.
Use residual heat for melting and keeping
food warm.
Daily use
Switching on and off
Touch
for 2 seconds to switch the appli-
ance on or off.
Adjusting the heat setting
Touch the control bar where there is a de-
sired heat setting. Correct to the left or the
right, if necessary. Do not release before
you reach a desired heat setting.
Bridge function
The Bridge function connects two cooking
zones and they operate as one.
First set the heat setting for one of the cook-
ing zone.
To activate the Bridge function touch
.
To set or change the heat setting touch one
of the control sensors.
To deactivate the Bridge function touch
. The cooking zones operate independently.
Using the Booster function
The Booster function makes additional pow-
er available to the induction cooking zones.
Touch
to switch it on, a lights up on a
display. After maximum 10 minutes, the in-
duction cooking zones automatically return
to cooking level
.
Power management
The power management shares the maxi-
mum available power between two cooking
zones generating a pair (see picture). Boos-
ter function can cause, that the maximum
available power for a pair is exceeded.
Then the second cooking zone will be auto-
matically reduced to a lower power level.
The display for the reduced zone alternates
between selected and maximum available.
Using the Timer
Touch
repeatedly until the pilot light of a
desired cooking zone displays. For exam-
ple,
for the front left zone.
ENGLISH 7
To Next Page
Loading...
Need help?
General