25
Manual on/off:
1. Press [ON/OFF] to
switch the lamp on or
off. The output lamp,
red, comes on
Resetting:
If commands are not shown on the
receiver’s LCD display, strange charac-
ters are displayed or it does not react
when keys are pressed the receiver
needs to be reset.
1. Press in ”the small”
[R] key on the re-
ceiver. The receiver shuts off and resets
random on/off, deactivate remote
control and the set brightness.
On/off receiver (fi g 3)
The -symbol is shown
on the receiver’s LCD
display. Press [ON/
OFF] on the receiver
for 3 seconds to allow
the reception of signals
again.
Installation
1. Insert the receiver in the outlet
socket. The Main lamp, green lamp,
comes on when the receiver is con-
nected to the mains supply.
2. Connect a device (max 3680W) to the
receiver.
To Next Page
Loading...
Need help?
General
