10
Setting up the Projector
Preparing to Connect Your Equipment to the Projector
NOTE: Before you continue,
make sure the projector and your
equipment are turned off. If you’re
connecting a computer, make
sure the distance between it and
the projector is 10 feet or less and
you’ve selected the appropriate
connectors on the CableWizard.
Now you’re ready to connect your equipment. Computers are
connected to the CableWizard. Video players and other equip-
ment, such as external speakers, are connected directly to the pro-
jector.
Steps for connecting the different types of equipment are given
on the pages listed below.
NOTE: In some older computers,
the monitor connector does not
have a hole for Pin 9. If you have
trouble connecting the
CableWizard computer cable to
your computer, contact In Focus
Technical Support.
F
IGURE
9
LitePro connector panel
Equipment you want to connect Page
IBM-compatible laptop computer page 11
IBM-compatible desktop computer page 13
Apple PowerBook page 15
Macintosh desktop computer page 17
Video player page 19
External speaker page 21
CableWizard
wired remote
external
speaker
s-video
composite
video
L/R audio in
(optional
accessory)
Downloaded From projector-manual.com Boxlight Manuals
To Next Page
Loading...
Need help?
General