INFOSEC UPS SYSTEM E3 PERFORMANCE RT Series User Manual

INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 06 17 AA 59 205 05

3 . O P E R A TI O N S
3.1 Buttons operation
Button view
Buttons
Functions
ON/MUTE button
 Turn on the UPS: Press and hold ON/MUTE button for at least
2 seconds to turn on the UPS.
 Mute the alarm: When the UPS is turned on in battery mode, press
and hold this button for at least 3 seconds to disable or enable the
alarm system. This is not applied to the situations when warnings or
errors occur.
 Up selection key: Press this button to display previous selection in
UPS setting mode.
 Switch to UPS self-test mode: Press and hold ON/MUTE buttons for
3 seconds to enter UPS self-testing while in AC mode.
OFF/ENTER button
 Turn off the UPS: Press and hold this button at least 2 seconds to turn
off the UPS.
 Confirm selection key: Press this button to confirm selection in UPS
setting mode.
SELECT button
 Switch LCD message: Press this button to change the LCD message
for input voltage, input frequency, battery voltage, output voltage and
output frequency.
 Setting mode: Press and hold this button for 3 seconds to enter UPS
setting mode only when UPS is off.
 Down selection key: Press this button to display next selection in UPS
setting mode.

INFOSEC UPS SYSTEM E3 PERFORMANCE RT Series Specifications

General

Brand	INFOSEC UPS SYSTEM
Model	E3 PERFORMANCE RT Series
Category	UPS
Language	English