1
SSR INTELLISYS ROTARY
TROUBLESHOOTING GUIDE
The following is a guide to be used when identifying the root cause of a
compressor problem.
Forms have also been developed for the SE and SG controller and must be filled
in if the controller is to be returned to the factory under warranty.
Any controller returned to the factory must have all shaded areas of the form
filled in completely and a copy of the form sent with the controller.
Flowcharts follow the forms. Use the flow charts to help identify the root cause.
Not all flowchart pages pertain to all controllers. Look in the top left corner to see
what controllers the particular page covers.
ORIG = Original Intellisys controller SSR 50-450HP
SE = SE Intellisys controller SSR 20-100HP
SG = SG Intellisys controller SSR 125-450HP
FSM = Field Service Manuals
9/16//99 Rev 5
To Next Page
Loading...
Need help?
General
