Innova ITX9600 User Manual

Attach the Right Handlebar (6) to the Rear Base Frame (8R) using 2 Bolts (20), 2
Washers (19), and 2 Lock Nuts (21). Be sure to insert Bolts (20) from the inside of the
frame. The Washers (19) and Lock Nuts (21) will be on the outside of the frame.
Do not tighten Bolts 20 until Bolt 22 is installed. Use Bolt (22) and Flat Washer (19) to
secure the Right Handlebar (6) to the Rear Base Frame (8R).
Attach the Left Handlebar (7) to the Rear Base Frame (8L) using 2 Bolts (20), 2 Washers
(19), and 2 Lock Nuts (21).
Unlock the chain that comes with the Safety Pin (26) and secure the Safety Pin (26) to the
Right Handlebar (6) with the chain provided. Insert the Safety Pin (26) through the hole on
the right side between the 2 frames (8R&9R) to lock the Base Frame open. See detailed
picture.
Step 2 – Handlebar Assembly
7
TIGHTEN ALL NUTS, BOLTS, AND SCREWS AT THIS TIME
19
26
20
19
21
19
21
19
19
20
8L
8R
22
7
6
Secure
Safety
Pin here
Insert
Safety
Pin here

Innova ITX9600 Specifications

General

Brand	Innova
Model	ITX9600
Category	Fitness Equipment
Language	English