‑5‑
Unpacking
● Do not install the equipment if you find any sign of damage, rust, or prior use on the
equipment or accessories.
● Do not install the equipment if you find any sign of water seepage or missing or damaged
components.
● Do not install the equipment if you find the packing list does not conform to the
equipment you received.
● Check whether the packing is intact and whether there is any sign of damage, water
seepage, dampness, and deformation.
● Unpack the package by following the unpacking sequence. Do not strike the package
violently.
● Check whether there is any sign of damage or rust on the surfaces of the equipment and
accessories.
● Check whether the package contents are consistent with the packing list.
Storage and transportation
● Handle the equipment with care during transportation and mind your steps to prevent
personal injuries or equipment damage.
● When carrying the equipment with bare hands, hold the equipment casing firmly with
care to prevent parts from falling. Failure to comply may result in personal injuries.
● Store and transport this product in strict accordance with the storage and transportation
requirements. Failure to comply may result in damage to the product.
● Do not store or transport the equipment in environments exposed to water splash, rain,
direct sunlight, strong electric field, strong magnetic field, and strong vibration.
● Avoid storing this product for more than three months. Long‑term storage requires
stricter protection and necessary inspections.
● Pack the equipment strictly before transportation. Use a sealed box for long‑distance
transportation.
● Never transport the equipment with other equipment or materials that may harm or
have negative impacts on this equipment.
To Next Page
Loading...
Need help?
General
