roducts.com
33
NS-32E859A11/NS-42E859A11 Getting Started
Understanding the basics
Turning your TV on or off
To turn your TV on and off:
1 Make sure that the power cord is already connected to a
power outlet.
2 Press (power) to turn on your TV. The power indicator LED
turns blue.
3 Press (power) again to turn off your TV. Your TV enters
Standby mode and the power indicator turns red
or purple,
depending on the TV power on mode you select. For more
information, see “Setting the TV power on mode” on
page 89.
Selecting the video input source
To select the video input source:
1 Turn on your TV, then press INPUT on the remote control.
The input source list opens.
2 Press ! or " to highlight a video input source, then press
SELECT. You can select:
• TV
• HDMI 1
• HDMI 2
• HDMI 3
• HDMI 4
• Component
/Composite (to select a component or
composite device)
• VGA
Navigating menus and using the on-screen
keyboard
Navigating the menus
Warning
When your TV is off, power still flows into it. To
disconnect power, unplug the power cord.
Note
If your TV does not detect a signal and you do not
press any buttons for several minutes, your TV goes
into Standby mode automatically.
Component/
Composite
HDMI 1
HDMI 2
HDMI 3
HDMI 4
VGA
TV
Press to open the menu.
Press $ to move the cursor on the
screen, adjust a selected item, or
enter a setting.
Press # to move the cursor on the
screen, adjust a selected item, or
return to the previous screen.
Press to select menu items.
Press to confirm your selections or
enter a sub-menu.
Press to return to the previous
screen.
Press to close the menu.
Did you know?
Insignia has a variety of
high-quality speaker
systems for your new TV.
To Next Page
Loading...
Need help?
General