5
Dash Camera
www.insigniaproducts.com
Installing your dash camera
1 Attach the dash camera to the suction mount (provided).
2 Install the suction mount onto your car’s front windshield, then adjust the
dash camera to the proper angle for recording.
3 Plug the USB cable micro SD connector into the dash camera.
4 Plug the other end of the USB cable into the car charger (provided).
5 Plug the car charger into a 12V car socket.
6 Turn on/off video
recording/OK button
While recording, press to stop recording. In stop mode,
press to begin recording.
In OSD mode, press to confirm selection.
7 Turn on/off sound
recording/
Down button
Press to turn the sound recording on or off.
In OSD mode, press to go to the next page.
8 MicroSD card slot Add a MicroSD memory card (8GB to 32GB) to this slot for
additional on-board memory.
9 Speaker Plays sound from the device.
10 Reset button Press to reset your dash camera.
11 Suction cup mount Attach the suction cup to this mount.
12 Mini USB jack Connect a USB cable to this jack to charge the dash
camera or to download files to a computer.
13 Power button Press to turn on the dash camera. Press and hold for two
seconds to turn off the dash camera.
14 Vents Provide airflow for the dash camera.
15 Microphone Allows you to record voice-over comments.
# ITEM DESCRIPTION
Recommend to layout USB cable
NS-CT1DC8_17-0513_MAN_V1_ENG.fm Page 5 Tuesday, December 12, 2017 11:25 AM
To Next Page
Loading...
Need help?
General
