15
9” Dual-Screen Portable DVD Players
www.insigniaproducts.com
Using your player
Turning your player on
1 Slide the ON/OFF switch on the side of your player to the ON position.
2 The start-up picture (DVD VIDEO) appears on the screen.
3 After use, slide the ON/OFF switch to the OFF position.
Playing a DVD or audio CD
1 Make sure that your player is connected to power.
2 Slide the ON/OFF switch to the ON position.
3 Slide the OPEN switch. The disc tray opens.
4 Place a disc, label side up, in the disc tray, then close the tray. The disc starts
playing automatically.
Notes
• Most DVDs and your player have region codes that help
control illegal distribution of DVDs. The region code for
your player is 1. You can only play DVDs with a region
code of 1
or ALL. The region code for a DVD is printed on
the DVD or the DVD packaging.
•This User Guide explains the basic instructions for
operating these players. Some DVDs are produced in a
manner that allows specific or limited operation during
playback. Therefore, these players may not respond to all
operating commands. THIS IS NOT A DEFECT. Please refer
to the instructions accompanying the specific DVD in
question for more information about the options
available on that DVD.
• “ ” may appear on the screen during operation. A “ ”
means the desired operation is not permitted by the
player or disc.
NS-DS9PDVD15_14-0610_MAN_V1_ENG.fm Page 15 Thursday, September 25, 2014 3:35 PM
To Next Page
Loading...
Need help?
General
