www.insigniaproducts.com
11
NS-RFD21CISS0
Leveling your refrigerator
Leveling your refrigerator is important. If you do not level your refrigerator during installation, the doors may not close or
seal correctly which can cause cooling, frost, or moisture problems.
• Rotate the adjustable feet clockwise to raise or counter-clockwise to lower your refrigerator. To make sure that the
doors close automatically, tilt the top of your refrigerator backward about 0.4" (10 mm) to 0.6" (15 mm). If necessary,
use a spanner wrench to adjust the feet.
CAUTION: The rollers are not casters. Use the rollers to move your refrigerator forward or backward. Do not use the rollers to move
your refrigerator from side to side. You might damage the floor or the rollers.
Note: To make it easier to adjust the feet, have someone tilt your refrigerator while you adjust the feet.
0.4" (10 mm) to
0.6" (15 mm)
Adjustable foot Roller Roller
To Next Page
Loading...
Need help?
General
