www.insigniaproducts.com
6
Insignia Voice™ Portable Speaker
Back
Setting up your speaker
To set up your speaker, you will need your speaker, its power adapter, and a phone or tablet.
1 Place your speaker in a convenient location.
2 Plug one end of the power adapter into a power outlet, then plug the other end into your speaker.
3 Press the power button on the back of your speaker to turn it on.
4 Make sure that your Wi-Fi, Location Services (GPS), and Bluetooth are turned on/enabled on your device.
5 Make sure that the clock on your device is set to the correct time.
6 Download and run the Google Home app on a phone or tablet to set up your speaker.
7 To use the Google Assistant, you must sign in to your Google Account.
For more help, visit g.co/home/setup
.
FEATURE DESCRIPTION
•Power
• Microphone on/off
•Factory reset
• Short press (~ 1 second) to turn the speaker on, or turn the
microphone on or off.
Note: The LEDs on the top of your speaker turn orange when the
microphone is muted.
• Press and hold for 4 seconds to turn your speaker off.
• Press for 12 seconds to reset the product.
+/- Press to increase or decrease the volume.
• Press to Play/Pause
• Press and hold to use voice commands.
Hold and press - Decrease the display brightness with each press of the - button.
Hold and press + Increase the display brightness with each press of the + button.
Press - and + • Press and hold for four seconds to enter Bluetooth-pairing mode.
Plug in power adapter The LED on the back:
• Lights solid orange while charging
• Turns off when the when fully charged
• Blinks orange when the battery is low
Proximity • Quick hand wave (less than 1 second): Illuminates your buttons
and lowers the volume/snoozes your alarm
• Hold hand over: Lowers brightness of all buttons
• Touch button: Raises button to full brightness
Power on/off
Microphone on/off
Power/Microphone
status light
Carrying handle
Power Input
12V/2.5A
To Next Page
Loading...
Need help?
General