Intel NUC Board D54250WYB and Intel NUC Board D34010WYB
Technical Product Specification
56
2.7 Reliability
The Mean Time Between Failures (MTBF) prediction is calculated using component and
subassembly random failure rates. The calculation is based on the Telcordia SR-332
Issue 2, Method I, Case 3, 55 ºC ambient. The MTBF prediction is used to estimate
repair rates and spare parts requirements. The MTBF for Intel NUC Board D54250WYB
and Intel NUC Board D34010WYB is 66,640 hours.
2.8 Environmental
Table 26 lists the environmental specifications for the board.
Table 26. Environmental Specifications
Parameter Specification
Temperature
Non-Operating
-40 °C to +60 °C
Operating
0 °C to +50 °C
The operating temperature of the board may be determined by measuring the
air temperature from the junction of the heatsink fins and fan, next to the
attachment screw, in a closed chassis, while the system is in operation.
Shock
Unpackaged 50 g trapezoidal waveform
Velocity change of 170 inches/s²
Packaged Half sine 2 millisecond
Product Weight (pounds) Free Fall (inches) Velocity Change (inches/s²)
<20 36 167
21-40 30 152
41-80 24 136
81-100 18 118
Unpackaged 5 Hz to 20 Hz: 0.01 g² Hz sloping up to 0.02 g² Hz
20 Hz to 500 Hz: 0.02 g² Hz (flat)
Packaged 5 Hz to 40 Hz: 0.015 g² Hz (flat)
40 Hz to 500 Hz: 0.015 g² Hz sloping down to 0.00015 g² Hz
Note: Before attempting to operate this board, the overall temperature of the board must be above the
minimum operating temperature specified. It is recommended that the board temperature be at least
room temperature before attempting to power on the board.
To Next Page
Loading...
Need help?
General
