Intel D845EPI Product Guide

Intel Desktop Board D845EPI Product Guide
60
Primary/Secondary IDE Master/Slave Submenus
Main Advanced Security Power Boot Exit
` [ :
Xxxxxxxxx ]
Type [Auto]
Maximum Capacity [Auto]
Configuration Options
Selected By BIOS
LBA Mode : [Supported]
Block Mode : 16 Sectors
PIO Mode : Auto
Ultra DMA : Disabled
m o
Select Screen
Cable Detected : Serial
n p
Select Item
Enter
Select ` Sub-Menu
F1 General Help
P9 Setup Defaults
F10 Save and Exit
ESC Exit
There are four IDE submenus: Primary master, primary slave, secondary master, and secondary
slave. Table 19 shows the format of these IDE submenus. For brevity, only one example is shown.
Table 19. Primary/Secondary IDE Master/Slave Submenus
Feature Options Description
Drive Installed None Displays the type of drive installed.
Type • Auto (default)
• User
Specifies the IDE configuration mode for IDE devices.
Auto fills-in capabilities from ATA/ATAPI device.
User allows capabilities to be changed.
Maximum Capacity None Displays the capacity of the drive.
LBA Mode Control
(Note)
None Specifies LBA mode control.
Block Mode • Disabled
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors (default)
Specifies number of sectors per block for transfers from
the hard disk drive to memory.
Check the hard disk drive’s specifications for optimum
setting.
continued

Intel D845EPI Specifications

General

Brand	Intel
Model	D845EPI
Category	Motherboard
Language	English