Intel D845PEBT2 Quick Reference

8 Intel Desktop Board D845PEBT2 Quick Reference
4 Installing Memory Modules
CAUTION
Install memory in the DIMM sockets prior to installing the AGP video card
to avoid interference with the memory retention mechanism.
Desktop Board D845PEBT2’s two DIMM sockets are arranged as DIMM 0 and
DIMM 1, as shown in the following figure. If installing a single DIMM, install
it in DIMM 0.
To install DIMMs, follow these steps:
1. Observe the precautions in “Before You Begin” on page 3.
2. Remove the AGP video card if it interferes with the DIMM clips from
being easily opened and closed.
3. Align the small notch at the bottom edge of the DIMM with the key in the
socket.
4. Insert the bottom edge of the DIMM into the socket.
5. Push down on the top edge of the DIMM until the retaining clips snap into
place. Make sure the clips are firmly in place.
OM14803
DIMM 0
DIMM 1

Intel D845PEBT2 Specifications

General

Brand	Intel
Model	D845PEBT2
Category	Motherboard
Language	English