Intel Desktop Board D865GVHZ Product Guide
68
Fan Control Submenu
Main Advanced Security Power Boot Exit
Fan Control Configuration
Setup Warning:
These options will not take effect until power has
been completely removed from the system. After
saving the BIOS settings and turning the system
off, unplug the power cord from the system and wait
for at least 30 seconds before reapplying power and
turning the system back on.
Fan Control [Enabled]
Select Screen
Lowest Fan Speed [Slow]
Select Item
Select
Sub-Menu
General Help
Setup Defaults
Save and Exit
Exit
The menu shown in Table 24 is used to configure hardware management features.
Table 24. Hardware Management
Feature Options Description
Fan Control
• Disabled
• Enabled (default)
Disables or enables system fan control.
Lowest Fan Speed
• Slow (default)
• Off
This option defines the fan speed at the lowest system
temperature.
Slow allows the fans to continue to run at a reduced speed
at low system temperatures.
Off turns off the fans at low system temperatures.
To Next Page
Loading...
Need help?
General
