Intel Desktop Board D945GNT/D945GTP Product Guide
30
Installing the I/O Shield
The desktop board comes with an I/O shield. When installed in the chassis, the shield blocks radio
frequency transmissions, protects internal components from dust and foreign objects, and promotes
correct airflow within the chassis.
Install the I/O shield before installing the desktop board in the chassis. Place the shield inside the
chassis as shown in
Figure 5. Press the shield into place so that it fits tightly and securely. If the
shield doesn’t fit, obtain a properly-sized shield from the chassis supplier.
OM17614
OR
OR
Figure 5. Installing the I/O Shield
To Next Page
Loading...
Need help?
General
