Intel Desktop Board D945PLNM Product Guide
28
4. Remove the plastic protective socket cover from the load plate (Figure 8, E). Do not discard
the protective socket cover. Always replace the socket cover if the processor is removed from
the socket.
OM19079
E
Figure 8. Remove the Protective Socket Cover
5. Remove the processor from the protective processor cover. Hold the processor only at the
edges, being careful not to touch the bottom of the processor (see Figure 9). Do not discard the
protective processor cover. Always replace the processor cover if the processor is removed
from the socket.
OM19080
Figure 9. Remove the Processor from the Protective Processor Cover/Do Not Touch