EasyManuals Logo
Home>Intel>Computer Hardware>D975XBX

Intel D975XBX User Manual

Intel D975XBX
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Product Description
11
Table 1. Feature Summary (continued)
Hardware Monitor
Subsystem
Hardware monitoring and fan control ASIC
Voltage sense to detect out of range power supply voltages
Thermal sense to detect out of range thermal values
Three fan connectors
Three fan sense inputs used to monitor fan activity
Fan speed control
1.1.2 Manufacturing Options
Table 2 describes the manufacturing options. Not every manufacturing option is available in all
marketing channels. Please contact your Intel representative to determine which manufacturing
options are available to you.
Table 2. Manufacturing Options
Auxiliary PCI
Express Graphics
Power Connector
Provides required additional power when using high power (75 W or greater) add-in
cards in either or both the Secondary PCI Express x16 (electrical x8) and the PCI
Express x16 (electrical x4) bus add-in card connectors
ATAPI CD-ROM
connector
A 1 x 4-pin ATAPI-style connector for connecting an internal ATAPI CD-ROM drive to
the audio mixer
Audio Subsystem
Intel High Definition Audio subsystem in one of the following configurations:
8-channel (7.1) audio subsystem with five analog audio outputs and two S/PDIF
digital audio outputs (coaxial and optical) using the Sigmatel* 9221 audio codec
6-channel (5.1) audio subsystem with three analog audio outputs using the
Sigmatel 9220 audio codec
Discrete SATA
RAID controller
Silicon Image Sil 3114 SATA RAID controller
Four SATA connectors (in addition to the four SATA connectors on the
ICH7-R/ICH7-DH SATA interface)
IEEE-1394a
Interface
IEEE-1394a controller and two IEEE-1394a connectors: one back panel connector
and one front-panel connector
Processor power
connector
One of the following connectors for providing +12 V power to the processor voltage
regulator:
2 x 4-pin (requires a power supply with a dual-rail 2 x 4 power cable). Boards
equipped with the 2 x 4-pin processor power connector will also include heatsinks
in the processor voltage regulator area.
2 x 2-pin
SCSI Hard Drive
Activity LED
Connector
Allows add-in hard drive controllers (SCSI or other) to use the same LED as the
onboard IDE controller.
Trusted Platform
Module (TPM)
A component that enhances platform security
For information about Refer to
Available configurations for the board Section 1.2, page 15

Table of Contents

Other manuals for Intel D975XBX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel D975XBX and is the answer not in the manual?

Intel D975XBX Specifications

General IconGeneral
BrandIntel
ModelD975XBX
CategoryComputer Hardware
LanguageEnglish

Related product manuals