EasyManuals Logo
Home>Intel>Computer Hardware>D975XBX

Intel D975XBX User Manual

Intel D975XBX
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Intel Desktop Board D975XBX Technical Product Specification
16
1.4 System Memory
The board has four DIMM sockets and supports the following memory features:
1.8 V and 1.9 V DDR2 SDRAM DIMMs
Unbuffered, single-sided or double-sided DIMMs with the following restriction:
Double-sided DIMMS with x16 organization are not supported.
8 GB maximum total system memory. Refer to Section 2.1.1 on page 47 for information on the
total amount of addressable memory.
Minimum total system memory: 128 MB
ECC DIMMs and non-ECC DIMMs
Serial Presence Detect
DDR2 667 and 533 MHz SDRAM DIMMs
NOTES
Remove the Primary PCI Express x16 (electrical x16 or x8) video card before installing or
upgrading memory to avoid interference with the memory retention mechanism.
To be fully compliant with all applicable DDR SDRAM memory specifications, the board
should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure.
This allows the BIOS to read the SPD data and program the chipset to accurately configure
memory settings for optimum performance. If non-SPD memory is installed, the BIOS will
attempt to correctly configure the memory settings, but performance and reliability may be
impacted or the DIMMs may not function under the determined frequency.
Table 4 lists the supported DIMM configurations.
Table 4. Supported Memory Configurations
DIMM
Capacity
Configuration
(Note 1)
SDRAM
Density
SDRAM Organization
Front-side/Back-side
Number of SDRAM
Devices
(Note 2)
128 MB SS 256 Mbit 16 M x 16/empty 4 [5]
256 MB SS 256 Mbit 32 M x 8/empty 8 [9]
256 MB SS 512 Mbit 32 M x 16/empty 4 [5]
512 MB DS 256 Mbit 32 M x 8/32 M x 8 16 [18]
512 MB SS 512 Mbit 64 M x 8/empty 8 [9]
512 MB SS 1 Gbit 64 M x 16/empty 4 [5]
1024 MB DS 512 Mbit 64 M x 8/64 M x 8 16 [18]
1024 MB SS 1 Gbit 128 M x 8/empty 8 [9]
2048 MB DS 1 Gbit 128 M x 8/128 M x 8 16 [18]
Notes:
1. In the second column, “DS” refers to double-sided memory modules (containing two rows of SDRAM) and “SS” refers to
single-sided memory modules (containing one row of SDRAM).
2. In the fifth column, the number in brackets specifies the number of SDRAM devices on an ECC DIMM.
#
INTEGRATOR’S NOTE
Refer to Section 2.1.1, on page 47 for additional information on available memory.

Table of Contents

Other manuals for Intel D975XBX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel D975XBX and is the answer not in the manual?

Intel D975XBX Specifications

General IconGeneral
BrandIntel
ModelD975XBX
CategoryComputer Hardware
LanguageEnglish

Related product manuals