Installing and Replacing Desktop Board Components
31
6. Hold the processor with your thumb and index fingers oriented as shown in
Figure 10. Make sure fingers align to the socket cutouts (Figure 10, A). Align
notches (
Figure 10, B) with the socket (Figure 10, C). Lower the processor straight
down without tilting or sliding the processor in the socket.
Figure 10. Install Processor
7. Pressing down on the load plate (Figure 11, A) close and engage the socket lever
(
Figure 11, B).
Figure 11. Close the Load Plate
To Next Page
Loading...
Need help?
General
