To Next Page

To Previous Page

Technical Reference

2.2.2.2 Add-in Card Connectors

The board has the following add-in card connectors:

• PCI Express 2.0 x16: one PCI Express 2.0 x16 connector. This connector supports

simultaneous transfer speeds of up to 8 GB/s of peak bandwidth per direction.

• PCI Express 2.0 x4: one PCI Express 2.0 x4 connector. The x4 interface supports

simultaneous transfer speeds up to 500 MB/s of peak bandwidth per direction and

up to 4 GB/s concurrent bandwidth.

• PCI Express 2.0 x1: one PCI Express 2.0 x1 connector. The x1 interface supports

simultaneous transfer speeds up to 1 GB/s of peak bandwidth per direction and up

to 2 GB/s concurrent bandwidth.

• One Conventional PCI (rev 2.3 compliant) connector.

Note the following considerations for the Conventional PCI bus connector:

• The Conventional PCI bus connector is bus master capable.

• SMBus signals are routed to the Conventional PCI bus connector. This enables

Conventional PCI bus add-in boards with SMBus support to access sensor data on

the desktop board. The specific SMBus signals are as follows:

⎯ The SMBus clock line is connected to pin A40.

⎯ The SMBus data line is connected to pin A41.

Intel DQ67OW User Manual

Other manuals for Intel DQ67OW