Intel Quad-Core Xeon User Manual

Quad-Core Intel® Xeon® Processor 5300 Series Datasheet 37
Electrical Specifications
Notes:
1. The V
CC_MIN
and V
CC_MAX
loadlines represent static and transient limits. Please see Section 2.13.2 for VCC
overshoot specifications.
2. Refer to Table 2-12 for processor VID information.
3. Refer to Table 2-13 for V
CC
Static and Transient Tolerance.
4. The load lines specify voltage limits at the die measured at the VCC_DIE_SENSE and VSS_DIE_SENSE
lands and the VCC_DIE_SENSE2 and VSS_DIE_SENSE2 lands. Voltage regulation feedback for voltage
regulator circuits must also be taken from processor VCC_DIE_SENSE and VSS_DIE_SENSE lands and
VCC_DIE_SENSE2 and VSS_DIE_SENSE2 lands. Refer to the Voltage Regulator Module (VRM) and
Enterprise Voltage Regulator Down (EVRD) 11.0 Design Guidelines for socket load line guidelines and VR
implementation. Please refer to the appropriate platform design guide for details on VR implementation
Figure 2-9. Quad-Core Intel® Xeon® Processor L5300 Series V
CC
Static and
Transient Tolerance Load Lines
VID - 0.000
VID - 0.010
VID - 0.020
VID - 0.030
VID - 0.040
VID - 0.050
VID - 0.060
VID - 0.070
VID - 0.080
VID - 0.090
VID - 0.100
0 5 10 15 20 25 30 35 40 45 50 55 60
Icc [A]
Vcc [V]
V
CC
Maxim um
V
CC
Typical
V
CC
Minim um
Table 2-14. V
CC
Static and Transient Tolerance for Quad-Core Intel® Xeon® Processor
X5365 Series (Sheet 1 of 2)
I
CC
(A) V
CC_Max
(V) V
CC_Typ
(V) V
CC_Min
(V) Notes
0 VID - 0.000 VID - 0.010 VID - 0.020 1,2,3
5 VID - 0.006 VID - 0.016 VID - 0.026 1,2,3
10 VID - 0.013 VID - 0.023 VID - 0.033 1,2,3
15 VID - 0.019 VID - 0.029 VID - 0.039 1,2,3
20 VID - 0.025 VID - 0.035 VID - 0.045 1,2,3
25 VID - 0.031 VID - 0.041 VID - 0.051 1,2,3
30 VID - 0.038 VID - 0.048 VID - 0.058 1,2,3
35 VID - 0.044 VID - 0.054 VID - 0.064 1,2,3
40 VID - 0.050 VID - 0.060 VID - 0.070 1,2,3
45 VID - 0.056 VID - 0.066 VID - 0.076 1,2,3

Intel Quad-Core Xeon Specifications

General

Brand	Intel
Model	Quad-Core Xeon
Category	Computer Hardware
Language	English