BIOS User Interface Intel® Server Board S3420GP TPS
Revision 2.4
Intel order number E65697-010
68
Table 29. Setup Utility – Console Redirection Configuration Fields
Setup Item Options Help Text
Console Redirection Disabled
Serial Port A
Serial Port B
Console redirection allows a serial port to be used for server
management tasks.
[Disabled] - No console redirection.
[Serial Port A] - Configure serial port A for console redirection.
[Serial Port B] - Configure serial port B for console redirection.
Enabling this option disables the display of the Quiet Boot logo
screen during POST.
Flow Control None
RTS/CTS
Flow control is the handshake protocol.
Setting must match the remote terminal application.
[None] - Configure for no flow control.
[RTS/CTS] - Configure for hardware flow control.
Baud Rate 9600
19.2K
38.4K
57.6K
115.2K
Serial port transmission speed. Setting must match the remote
terminal application.
Terminal Type PC-ANSI
VT100
VT100+
VT-UTF8
Character formatting used for console redirection. Setting must
match the remote terminal application.
Legacy OS
Redirection
Disabled
Enabled
This option enables legacy OS redirection (i.e., DOS) on serial
port. If it is enabled, the associated serial port is hidden from the
legacy OS.
6.3.2.5 Server Management System Information Screen
The Server Management System Information screen allows the user to view part numbers,
serial numbers, and firmware revisions.
To access this screen from the Main screen, select Server Management > System
Information.
To Next Page
Loading...
Need help?
General
